Functions
3.19 Local device interface
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
81
Local device interface
Description
The local optical device interface can be used to connect the motor starter to a PC or hand-
held device (order no.: 3RK1922-3BA00; RS232 interface cable: 3RK1922-2BP00 or USB
interface cable 6SL3555-0PA00-2AA0). This control source has the highest priority.
To stop the fiber-optic cable for the device interface from getting dirty, it is located under the
removable unit labeling plate.
Figure 3-11 Optical device interface
To ensure that data can be transferred without any problems, make sure that the device
interface is clean at all times.
To Next Page
Loading...
