Siemens SIRIUS M200D - Inputs

Technical data
8.4 Inputs
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
173
8.4
Inputs
Input characteristic to IEC60947-1 Appendix S and IEC61131-2 Type 1
Input voltage - Rated value
- for signal "0"
- for signal "1"
24 V DC
-3 to +5 V
11 to 30 V
Input current for signal "1" 7 mA, typ.
Connection of 2-wire BEROs Possible
Permissible residual current 1.5 mA, max.
Sensor supply max.: Operating voltage DC24V-NS
min. : Operating voltage DC24V-NS - 2 V
Short-circuit and overload resistant
Total current sensor supply Max. 200 mA (sensor supply is short-circuit proof)
Connection M12 connectors
Assignment of inputs
IN1
IN2
IN3
IN4
Input 1 (DI 0.4)
Input 2 (DI 0.5)
Input 3 (DI 0.6)
Input 4 (DI 0.7)
8.5
Outputs
Number of digital outputs 2
Switching capacity 0.5 A continuous current
Cable length Shielded
Unshielded
30 m, max.
Short-circuit protection
Response threshold
Electronic
> 0.7 A, typ.
Limiting of inductive shutdown voltage Integrated free-wheeling diode
Lamp load 5 W, max.
Voltage drop For signal 1 U
DC24V-S
+ (- 0,8 V), min.
Residual current For signal 0 0.5 mA max.
Connection M12 connectors
Assignment of output
OUT1
OUT2
Output 1 (DO 1.0)
Output 2 (DO 1.1)
Depending on the parameter "Output n - action"