Product family
2.3 Design concept
M200D PROFIBUS/PROFINET
20 Manual, 08/2014, A5E01577426A/RS-AA/004
Design concept
Connections and controls on the motor starter
Disconnecting means (circuit breaker), can be locked
Optical device interface
7/8" connection for 2 x 24 V (IN/OUT)
Diagnostic LEDs
PROFIBUS/PROFINET connection M12
Setting elements on PROFIBUS DP (address, terminating resistor)
4 digital inputs M12
Up to 3 protection guards for cables and connections (accessories)
4 fixing holes for mounting/1 connection for FE
400 V incoming supply (HAN 4/2)
Motor connection (HAN 8/0)
Key-operated switch (order variant)
Keypad for manual operation (order variant manual local control)
To Next Page
Loading...
