Siemens SIRIUS M200D - DS134 Read;Write Maintenance

Appendix
A.1 Data formats and data sets
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
215
A.1.17
DS134 Read/write maintenance
Byte
Parameter
Range of values
Increment
Factory setting
Relevant for
Preamble
01 Coordination 0x21 Write via acyclic bus channel (PLC)
2 Reserved 0x00
3 Reserved 0x00
4 ... 7 Reserved 0x00
User data
8 ... 11 Maintenance timer - warning limit_1 0 … 4 294 967 295 s 1 s 946 080 000
(30 years)
All starters
12 ... 13 Maintenance timer - warning limit_2 0 … 4 294 967 295 s 1 s 946 080 000
(30 years)
All starters
A.1.18
DS165 Read/write comments
Components of a plant are provided with a unique identifier by the user when configuring the
plant. This identifier gives information about the installation location and the field of
application. The individual components are then provided locally with an appropriate label.
The motor starter supports electronic device identification. Data set 165 is used for this
purpose.
Byte
Data type
Meaning
0 ASCII char First character
1 ASCII char Second character
... ... ...
127 ASCII char 128. character
128 ASCII char 129. character
... ... ...
199 ASCII char 200. character