Configuration / parameterization
5.4 Motor Starter ES software
M200D PROFIBUS/PROFINET
134 Manual, 08/2014, A5E01577426A/RS-AA/004
Motor Starter ES software
Properties
The Motor Starter ES diagnostics and commissioning tool (Version 2007 SP2 and higher)
offers you the following:
● Structured, tool-based configuration of low-voltage switching devices
● Fast diagnostics
● Local commissioning and monitoring, such as:
– Parameterization during operation of the controller and the control system
– Monitoring
– Diagnostics and testing
– Factory settings
– Read-out of individual phase currents as direct values
– Residual current detection
– Setting a parameter block function
– Integrated online help
– Read-out of statistical values and measured values
Motor Starter ES order number: 3ZS1310-5CC10-0YA5
Motor Starter ES is operated via the local device interface.
The connection between the PC or programming device and the motor starter is established
using an infrared RS232 PC cable for the optical device interface (see Local device interface
(Page 81)).
To Next Page
Loading...
