Mounting / connection
4.2 Connection
M200D PROFIBUS/PROFINET
106 Manual, 08/2014, A5E01577426A/RS-AA/004
Power terminal
Wiring X1 (power supply) and X2 (motor connection)
The supply voltage is fed via power connector X1.
The motor is supplied via power connector X2.
When inserting the pin/female contact insert into the connector housing, make sure that the
coding is positioned correctly.
Socket X2
with 400 V /
230 V AC brake
Socket X2
with 180 V DC
brake
1 Phase L1 L1 out L1 out L1 out
2 Phase L2 --- N (for 230 V AC
brake)
---
3 Phase L3 L3 out L3 out L3 out
4 N --- Brake L1
(switched)
Brake L1
(switched) "-"
5 ---
2)
2)
2)
6 --- --- Brake L3
(direct, for
400 V AC
brake)
Brake L3
(direct) "+"
7 --- L2 out L2 out L2 out
8 ---
2)
2)
2)
11
1)
--- --- ---
12
1)
--- --- ---
PE PE PE PE
1)
Connector monitoring
2)
Temperature sensor
To Next Page
Loading...
