Siemens SIRIUS M200D - Communication Modules

Mounting / connection
4.2 Connection
M200D PROFIBUS/PROFINET
112 Manual, 08/2014, A5E01577426A/RS-AA/004
4.2.8
Communication modules
4.2.8.1
PROFIBUS DP
Introduction
You connect the supply voltage and PROFIBUS DP at the M200D PROFIBUS
communication module.
Figure 4-7 PROFIBUS DP communication module
-X33
24V DC
7/8" circular socket connector (with pin insert) for infeed of the DC 24V-NS
electronic/encoder supply and the DC 24V-S load voltage supply
-X34
24V DC
7/8" circular socket connector (with socket insert) for looping through the DC 24V-NS
electronic/encoder supply and the DC 24V-S load voltage supply
-X31
DP1
M12 circular socket connector (with pin insert) for supplying PROFIBUS DP
-X32
DP2
M12 circular socket connector (with socket insert) for looping through PROFIBUS DP