M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
9
What are M200D distributed motor starters?
M200D motor starters are standalone devices with a high degree of protection (IP65) for
distributed use near the motor.
Depending on the order variant, they are available as:
● Direct starters, electromechanical (DSte) or electronic (sDSte)
● Reversing starters, electromechanical (RSte) or electronic (sRSte)
● Direct soft starters, electronic (sDSSte)
● Reversing soft starters, electronic (sRSSte)
They are suitable for the following tasks:
● Switching and protecting three-phase loads at 400 V AC up to 5.5 kW
● Controlling via
– PROFINET IO
– PROFIBUS DP or
– AS-Interface
Depending on the order variant, they are equipped with:
● Brake output for 400 / 230 V AC or 180 V DC
● Integrated manual local control with a key-operated switch and keypad (order variant)
To Next Page
Loading...
Need help?
General
