M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
91
Hazardous Voltage
Can Cause Death, Serious Injury, or Property Damage
Before starting work, disconnect the system and devices from the power supply.
The distributed M200D motor starter is designed for simple mounting. Carry out the following
steps:
1. If you use the protection guard (accessory), start with its assembly,
see Chapter Installing the protection guards (Page 96).
2. Install the motor starter module on a flat surface
see Chapter Installing the motor starter (Page 97).
3. Connect to functional ground,
see Chapter Connecting to functional ground (Page 98).
4. Then mount the communication module on the motor starter module (3RK1395), see
Chapter Installing the communication module (Page 99).
– PROFIBUS communication module (3RK1305)
– PROFINET communication module (3RK1335)
To Next Page
Loading...
Need help?
General
