UM353-1 Model Designation and Specifications
March 2003
14-3
14.2 ACCESSORIES
The following two tables list the accessories currently available.
ACCESSORY PART NUMBER DESCRIPTION
i|config Graphical
Configuration Utility
iCONFIG-Vn.nn Windows 95, 98 and NT compatible software for PC-based
controller configuration and creation of a function block
diagram. Transfer configuration to and from controller via
Modbus, LIL, or Ethernet.
Vn.nn - the latest software version will be supplied.
Includes:
16353-61 Cable - see description below
16353-63 Adapter - see description below
Transmitter Power Supply 15124-1 Acopian Model B24G210M, 24 Vdc, 2.0A
Adapter Bezel 15738-123 A panel cutout adapter for mounting a controller in a 3"x 6"
panel cutout.
Blank Filler Panel 15738-168 Enhances control room appearance by covering a panel
cutout intended for future mounting of a controller.
Loop Identification Card ----- Custom printed loop identification for flip-down access
door. Specify up to 5 lines with 24 characters per line.
Permanent Instrument Tag ----- Stainless steel tag permanently attached to the controller
case. One line with up to 24 characters can be specified.
Display Assembly Remote
Mounting Kit
16353-54 For remote panel mounting of a Display Assembly. Includes:
Flange Assembly
Mounting Clips and Screws
Display (Ribbon) Cable, 48 inches (1219 mm) long
Installation Instruction
Does not include the Display Assembly.
Communications Cable,
MMJ11 to MMJ11
16353-61 Connects MMJ11 on adapter (connected to a personal
computer’s serial port) to MMJ11 on a Display Assembly.
Select one of the following adapters.
Adapter, DB25 to MMJ11
Adapter, DB9 to MMJ11
16353-62
16353-63
Adapts personal computer serial port to above
Communications Cable.
Faceplate Labels ----- Discontinued.
LONWORKS ACCESSORY PART NUMBER DESCRIPTION
LonWorks Protocol Startup Kit 16353-65 LonWorks Startup Kit; includes:
27005-1 Adapter - see description below
15939-70Vn.nn Driver - see description
below
16353-66 Cable - see description below
Echelon 73000-1-600-6 SLTA/2 27005-1 Serial PC Interface Adapter
Echelon SLTA/2 Device Driver 15939-70Vn.nn PC software (latest version will be supplied)
SLTA/2 to LonWorks Network Cable 16260-27 Cable assembly to connect DB9 on PC serial
port to DB9 on SLTA Adapter
Configuration Software 27005-2 Acromag 50SW-CFS-M03-1.44MB
To Next Page
Loading...
