Model Designation and Specifications UM353-1
March 2003
14-4
LONWORKS ACCESSORY PART NUMBER DESCRIPTION
1-Channel T/C, RTD Input Module 27005-4 Acromag 550L3-502-TEMPR-10-NCR
Quad V/mAdc Input Module, +/- 1 Volt
19
27005-5 Acromag 550L3-503-4V1-10-NCR
Quad V/mAdc Input Module, +/- 1 Volt,
with Factory Calibration
27005-6 Acromag 550L3-503-4V1-10-NCR-C
4-Channel High Level DC Input Module,
+/- 10; +/- 100 Volts
27005-7 Acromag 550L3-504-4V2-10-NCR
4-Channel High Level DC Input Module,
+/- 10; +/- 100 Volts, with Factory
Calibration
27005-8 Acromag 550L3-504-4V2-10-NCR-C
2-Channel 4-20 mA Output Module 27005-9 Acromag 570L3-701-C1-10-NCR
3-Channel Isolated DC Discrete Input
Module
27005-10 Acromag 540L3-401-3DC-10-NCR
3-Channel Isolated AC Discrete Input
Module
27005-11 Acromag 540L3-401-3AC-10-NCR
8-Channel DC Discrete Input Module 27005-12 Acromag 540L3-410-8D1-10-NCR
3-Channel Mechanical Relay Output
Module
27005-13 Acromag 560L3-601-3MR-10-NCR
3-Channel Solid State Relay Output
Module
27005-14 Acromag 560L3-601-3SS-10-NCR
8-Channel DC Discrete Output Module 27005-15 Acromag 560L3-610-8DO-10-NCR
4-Input/4-Output DC Discrete Module 27005-16 Acromag 580L3-810-4I4O-10-NCR
16 Digital Inputs, DC Powered Module 16802-3 Discontinued.
16 Digital Outputs, DC Powered Module 16802-4 Discontinued.
Power Supply, Input 115-230 Vac, Output
24 Vdc @ 2.1A
27005-24 idec PS5R-D24
14.3 SERVICE PARTS KITS
Exploded view drawings of the Moore 353 appear in Section 1 Introduction and Section 11 Maintenance.
SERVICE PART DESCRIPTION PART NO.
- FIRMWARE UPDATE KITS -
MPU Controller Firmware V2.## to V3.00 15939-71V3.00
MPU Controller Firmware V1.## to V3.00 15939-77V3.00
- ELECTRONIC ASSEMBLIES AND RELATED PARTS -
Display Assembly Kit, for Model 353 _ _ F _ _ _ _ _ _ _ _ _ 16353-53*
Display Assembly Bezel Replacement Kit
Contains gray bezel, keypad, pulsar knob, and Instruction.
Does not contain black Display Board or Display Assembly mounting screws.
16353-163
MPU Controller Board Kit for 120/240 Vac Power Input, for
Model 353A _ _ _ _ _ _ _ _ _ _ _
16353-68*
MPU Controller Board Kit for 24 Vdc Power Input, for
Model 353D _ _ _ _ _ _ _ _ _ _ _
16353-67*
19
For 4-20 mA input module, order 72005-6 calibrated to 0.2 to 1V. (Replaces part 27005-3.)
To Next Page
Loading...
