Siemens Moore 353 - Pushbutton Loop Data

UM353-1 Network Communications
March 2003 6-11
6.2.6 Pushbutton Loop Data
Pushbutton loop data occupies two LIL channels. The starting channel is entered during configuration of the ODP
operator display function block for each loop, as LIL CHAN (n). The first channel for each loop can be viewed in
station data starting at channel 7/parameter 38. The station configuration entry (both local and graphical PC-based)
will indicate the next available open space of six contiguous channels. Another starting channel can be entered but
it is important to utilize the lowest total number of channels.
Channel locations n through n+1, in the table below, identify variables that will be available on the LIL for each
analog indicator loop. All parameter 1 data (e.g. discrete input states) is global and is transmitted every 0.5 second.
All other data is sent out on command.
C\P 1 2 3 4 5 6 7 8 9 10 11 12
n
L#SW1 L#TAG
n+1
L#SW2
C\P 13 14 15 16 17 18 19 20 21 22 23 24
n
L#G1TAG L#G1P1T L#G1P2T L#G1SAT
n+1
L#G1F1T L#G1FOT L#G1SMT
C\P 25 26 27 28 29 30 31 32 33 34 35 36
n
L#G2TAG L#G2P1T L#G2P2T L#G2SAT
n+1
L#G2F1T L#G2FOT L#G2SMT
C\P 37 38 39 40 41 42 43 44 45 46 47 48
n
L#G3TAG L#G3P1T L#G3P2T L#G3SAT
n+1
L#G3F1T L#G3FOT L#G3SMT
C\P 49 50 51 52 53 54 55 56 57 58 59 60
n
L#G4TAG L#G4P1T L#G4P2T L#G4SAT
n+1
L#G4F1T L#G4FOT L#G4SMT
C\P 61 62 63 64 65 66 67 68 69 70 71 72
n
L#G5TAG L#G5P1T L#G5P2T L#G5SAT
n+1
L#G5F1T L#G5FOT L#G5SMT
C\P 73 74 75 76 77 78 79 80 81 82 83 84
n
L#G6TAG L#G6P1T L#G6P2T L#G6SAT
n+1
L#G6F1T L#G6FOT L#G6SMT
C\P 85 86 87 88 89 90 91 92 93 94 95 96
n
L#G7TAG L#G7P1T L#G7P2T L#G7SAT
n+1
L#G7F1T L#G7FOT L#G7SMT
C\P 97 98 99 100 101 102 103 104 105 106 107 108
n
L#G8TAG L#G8P1T L#G8P2T L#G8SAT
n+1
L#G8F1T L#G8FOT L#G8SMT

StockCheck.com