Siemens Moore 353 - Dynamic Loop Floating Point Data (32-Bit IEEE)

UM353-1 Data Mapping
March 2003
7-11
7.3.4 Dynamic Loop Floating Point Data (32-bit IEEE)
Controller [ODC]
Code R/W Description Range Register (MB) C/P (LIL)
L#PF R Process Real 41951+20(#-1) n/9-10
L#SF R/W Setpoint Real 41953+20(#-1) n+1/9-10
L#VF R/W Valve Real 41955+20(#-1) n+2/9-10
L#XF R X Variable Real 41957+20(#-1) n+3/25-26
L#YF R Y Variable Real 41959+20(#-1) n+4/25-26
L#RF R/W Ratio Real 41961+20(#-1) n/23-24
L#BF R/W Bias Real 41963+20(#-1) n/25-26
L#TLF R Totalizer Real 41965+20(#-1) n+3/13-14
(spare) ($00000000) 41967+20(#-1)
(spare) ($00000000) 41969+20(#-1)
Sequencer [ODS]
Code R/W Description Range Register (MB) C/P (LIL)
L#SSNF R/W Sequencer Step No.* Real 41951+20(#-1) n/2-3
L#SAOF R Sequencer Analog Output Real 41953+20(#-1) n+1/2-3
L#SAOmF
R Step Analog Out (most sig. word)# Real n/a n+1/1
L#SAOlF
R Step Analog Out (least sig. word)# Real n/a n+2/1
L#SAEPF
R Step Analog End Point Real 41955+20(#-1) n+1/4-5
L#SRTF R/W Step Remaining Time* Real 41957+20(#-1) n+3/2-3
L#SSTF R Sequencer Step Time Real 41959+20(#-1) n+3/4-5
L#SNSF R Sequencer Number of Steps Real 41961+20(#-1) n/6-7
L#SNGF R Sequencer Number of Groups Real 41963+20(#-1) n/8-9
L#SNRF R Sequencer Number of Recipes Real 41965+20(#-1) n+1/7-8
L#CRNF Current Recipe Number @ Real 41967+20(#-1) n+1/9-10
R/W (spare) 0($00000000) 41969+20(#-1)
Analog Indicator [ODA] - (V2.2)
Code R/W Description Range Register (MB) C/P (LIL)
L#P1F R Process 1 Real 41951+20(#-1) n/2-3
L#P2F R Process 2 Real 41953+20(#-1) n+1/2-3
L#P3F R Process 3 Real 41955+20(#-1) n+2/2-3
L#P4F R Process 4 Real 41957+20(#-1) n+3/2-3
(spare) 0($00000000) 41959/69+20(#-1)
Discrete Indicator [ODD] & [ODP]- (V2.2)
Code
R/W Description Range Register (MB) C/P (LIL)
n/a
* A Write command will force the Step or Remaining Time to the write value.
@ The current recipe can be changed if the Sequencer is in the HOLD mode.
StockCheck.com