Siemens Moore 353 - Product Description

Introduction UM353-1
March 2003
1-2
1.1 PRODUCT DESCRIPTION
The Moore 353 offers the control system designer the ultimate in flexibility and capability for the implementation of
continuous solutions and batch solutions. An exploded view of the controller appears in Figure 1-1.
At the heart of the Moore 353 is a powerful MPU Controller board that uses the latest in microprocessor
technology. It includes on-board I/O and reusable function blocks, and it is capable of solving a vast array of
control implementations including single loop, cascade, and dual loop. Available MPU board I/O is listed in the
table below.
* = Case Assembly
RJ-45 Ethernet Connector*
Ethernet
Cable
Display Assembly with Operator Faceplate
Communication Port on Underside
O-Ring, Display Assembly
Warning Label
Flip-Down Door with Loop ID Card
MPU Controller Board
Mounting Kit, Accessory Boards
Voltage Input, Approvals, and
Warning Label*
Nameplate*
Warning and I/O
Capacity Label*
Case with Flange*
Connector Socket
Assembly*
Ground Screw*
Connector Cover*
Removable
Portions of
Connectors*
I/O Expander
Board
Mounting Clip,
Top and Bottom*
MG00392b
LIL or Ethernet
Network Board
RTC/CB or
RCB Board
Future
Use
LonWorks
Board
Accessory or
Option Boards
FIGURE 1-1 Moore 353, Exploded View
Modbus communication is standard and a port (RS485, half-duplex) at the rear terminals provides for network
connection of up to 32 controllers (e.g. Models 352P, 353, 354, 354N, and Procidia™ i|pac™) to an operator
workstation, Human/Machine Interface (HMI), or DCS, enabling integration of controllers into a plant-wide system.
A popular HMI is the Procidia i|station™ running i|ware PC™ operator interface software. A communication port
(RS232) on the underside of the Display Assembly is available for configuration and/or debugging when using
i|config™, the optional PC-based Graphical Configuration Utility.
An optional I/O Expander Board can be added to the base Moore 353. It includes direct thermocouple, RTD, and
frequency inputs and additional I/O for direct process measurement of temperature and frequency variables,
improving accuracy and control. Available Expander board I/O is listed below.
I/O on MPU Controller Board I/O on Expander Board
Analog Inputs 1, 2, and 3 Analog Input 4
Analog Outputs 1 and 2 Analog Output 3
Digital Inputs 1 and 2 Digital Inputs 3 and 4
Digital Outputs 1 and 2 ---
--- Analog Inputs Universal 1 and 2
--- Digital Inputs Universal 1 and 2
--- Relay Outputs 1 and 2
StockCheck.com