Siemens Moore 353 - Page 287

UM353-1 Model Designation and Specifications
March 2003
14-5
SERVICE PART DESCRIPTION PART NO.
I/O Expander Board Kit, for Model 353 _ _ _ 1 _ _ _ _ _ _ _ _. Contains I/O
Expander Board and Range Resistor and Reference Junction Kit. Does not include
terminals 27-52; see following notes.
Notes:
1. Case Option 4 - Case supplied with all needed connectors.
2. Case Option 2 - Order Connector Kit PN 16353-133 (see below) if adding board
to case having black side-entry connectors. Kit contains terminals 27-52.
3. Case Option 1 - Connector Upgrade Kit PN 16353-230 (see below) must be
installed before the I/O Expander Board Kit can be installed.
16353-52*
Local Instrument Link Network Board Kit with mounting hardware, for
Model 353 _ _ _ _ _ _ L _ _ _ _ _.
16297-22*
Ethernet Network Board Kit with mounting hardware, for
Model 353 _ _ _ _ _ _ E _ _ _ _ _. (Requires case with new design terminals and
MPU board made after 10/01 with battery mounted flat and version 2.40 firmware
or greater.)
16353-164
LonWorks Board Kit with mounting hardware, for
Model 353 _ _ _ _ L _ _ _ _ _ _ _.
16353-69*
LonWorks Resistor Kit, includes:
2000 Ohm, 5%, 1/4W, qty 8
105 Ohm, 1%, 1/8W, qty 2
52 Ohm, 1%, 1/8W, qty 4
Diode, 1N4005G, 1A, 600V, qty 8
16353-141
Removable Configuration Board Kit with mounting hardware, for
Model 353 _ _ _ _ _ _ _ R _ _ _ _ (for firmware V1.31 or V1.32)
16353-143
Real Time Clock/Configuration Backup Board Kit (for firmware V2.20 or higher) 16357-34*
Spare Parts Kit, includes:
Power Input and Range Resistor Kit, includes:
250 Ohm, 0.1%, 3W, WW resistor and insulating sleeving, qty 3 each
Crimp-on connector, qty 6
Range Resistor and Reference Junction Kit, includes:
250 Ohm, 0.1%, 3W, WW resistor, qty 1
3.75 Ohm, 1%, 3W, WW resistor, qty 2
Insulating sleeving, qty 5
Crimp-on connector, qty 6
100 Ohm reference junction for TC inputs, qty 2
Crimp-on Connector, qty 18
O-Ring, Display Assembly, qty 1
Fuses, 0.5A (for 120/240 Vac MPU Controller board) and 2A (for 24 Vdc
MPU Controller board), 250V, SloBlo, qty 1 each
Case Mounting Clip and 8-32 x 1 Fillister Hd. Screw, qty 2 each
Case Ground Screw (Green), qty 1
16353-131*
- CASE AND CASE MOUNTED CONNECTORS -
Black Side Entry Connectors, Terminals H, N, 3-13 and 14-26, qty 2 each Discontinued
Black Side Entry Connectors, Terminals 27-39 and 40-52, qty 2 each Discontinued
StockCheck.com