Siemens Moore 353 - Page 291

UM353-1 Model Designation and Specifications
March 2003
14-9
Type US (NBS126) RTD (à = 0.003902):
Range Limits...................................185°C to 613°C (-300°F to 1135°F)
Accuracy .........................................+/-0.4°C
Software Output Type.....................Analog (configurable °C, °F, °R, °K)
Ambient Temperature Effect: ........+/- 0.04°C/°C
Type JIS C-1604 RTD (à = 0.003916):
Range Limits...................................-185°C to 610°C (-300°F to 1130°F)
Accuracy .........................................+/-0.4°C
Software Output Type.....................Analog (configurable °C, °F, °R, °K)
Ambient Temperature Effect: ........+/- 0.04°C/°C
Slidewire
Resistance Range ............................500-5000 Ω
Software Output Type.....................Analog (% slidewire 0.0 to 100.0)
Accuracy: ........................................+/- 0.1%
Ambient Temperature Effect: ........+/- 0.01°C/°C
Ohms
Resistance Range ............................0-5000 Ω
Software Output Type.....................Analog (ohms)
Accuracy: ........................................+/- 0.1%
Ambient Temperature Effect: ........+/- 0.01°C/°C
Millivolt
Narrow Range .................................-19.0 to 19.0 mVdc
Accuracy .........................................+/-5.0 uV
Ambient Temperature Effect ..........1.0 uV/°C
Wide Range.....................................-30.0 to 77 mVdc
Accuracy .........................................+/-8.0 uV
Ambient Temperature Effect ..........2.5 uV/°C
Software Output Type.....................Analog (millivolts)
Analog Input: (1)
Input Range ...................................................0-5 Vdc (standard calibration 1-5 Vdc)
Zero.................................................0-1 Vdc
Span ................................................4-5 Vdc
Type ........................................................Single ended
Accuracy ......................................................0.10 %
Resolution ....................................................0.024 %
Software Output Type...................................Analog [configurable (default 0.0 - 100.0)]
Normal Mode Rejection ................................>50dB @ 60Hz.
Input Impedance............................................>1 megohm
Maximum Continuous Input .........................+/-30 Vdc
Analog Output: (1)
Standard Calibration......................................4-20 mAdc
Zero.................................................4 mAdc +/- trim
Span ................................................16 mAdc +/- trim
Accuracy ......................................................0.10 %
Resolution ....................................................0.003 %
Software Input Type......................................Analog [configurable (default 0.0 - 100.0)]
Current Range Limits ....................................2.4 to 21.6 mA dc
Signal Reference ...........................................Neg. (-) output tied to station common
Output Load ..................................................800 Ohms
Overvoltage Protection..................................30 Vdc
StockCheck.com