Siemens SC 7000 Service Manual

SC 7000 and SC 9000XL Patient Monitors Service Manual
ASK-T898-03-7600 Siemens Medical Systems, EM-PCS Danvers 133
7k9kXLSM.apc.CD_ROM.fm/04-99/kaupp
NOT A CONTROLLED DOCUMENT
8036f000 Bad Network Config
Data Reset
Upgrade SW to ≥VC1.x.
8038d001 MIB Connection/
Disconnection reset
Upgrade SW to ≥VC2.x.
803c1000 Remote view, auto
dual view reset
Upgrade SW to ≥VC1.x.
803f1xxx
803f2xxx
803f3xxx
803f4xxx
etCO2 Pod/Cartridge - related Try swapping out airway
adaptor with known-good
components.
Try disconnecting/
reconnecting cable.
If problem persists, swap
cable with known-good
cable.
If problem persists try
swapping pod.
If problem persists, replace
Main Processor Board
Subassembly.
ffffffff boot_program_images failed with
status: A on image: B
Flash programming
error when
performing a
download
Retry download. If problem
persists replace Main
Processor Board
Subassembly if downloading
monitor SW. replace CPS or
IDS, If downloading CPS/
IDS software.
Table C-1Diagnostic Log Codes (Continued)
Code
xxx = any
alphanumeric
characters
Description Cause Action

Siemens SC 7000 Specifications

General

Brand	Siemens
Model	SC 7000
Category	Measuring Instruments
Language	English