Installation
5.3 Inserting media modules and SFP transceivers
SCALANCE X-300
114 Operating Instructions, 10/2010, A5E01113043-10
Note
SFP transceivers with the SCALANCE X324-4M EEC
In contrast to the information in the product documentation for the SCALANCE MM900,
MM992-2SFP media modules can be operated in the SCALANCE X324-4M EEC at ambient
temperatures up to a maximum of 70 °C if the following requirements are met:
MM992-2SFP media modules as of hardware product version 02 are suitable. The
hardware product version can be found on the device. You can also read out this
information with the WBM or the CLI.
Only the following SFP transceivers may be used:
– SFP991-1
– SFP991-1LD
– SFP992-1
– SFP992-1LD
NOTICE
Slot number
With modular devices (M), the MM900 media modules must be given a slot number.
The slot number labels are supplied with the modular devices (M).
To Next Page
Loading...
