Installation
5.3 Inserting media modules and SFP transceivers
SCALANCE X-300
Operating Instructions, 10/2010, A5E01113043-10
115
Installing a media module
The media module is inserted with the handle pulled out. When the handle is inserted, the
media module is locked in the device.
1. Select the required slot on the device (for example,
X308-2M). Remove the dummy cover.
2. Pull out the handle on the selected media module.
3. Place the media module in the guide rails of the device
slot. The media module is correctly installed when it clips
easily into the device.
To Next Page
Loading...
