Installation
5.3 Inserting media modules and SFP transceivers
SCALANCE X-300
124 Operating Instructions, 05/2016, A5E01113043-20
SFP installation in SFP media module
If you use SFPs that are not approved by Siemens AG, there is no guarantee that the
device will function according to the specification.
If you use unapproved SFPs, this can lead to the following problems:
• Damage to the device
• Loss of the approvals
• Violation of the EMC regulations
Use only approved SFPs.
You can insert or remove the SFP during ongoing operation.
Note
Only the media module MM992
-2SFP may be fitted with approved SFPs. The SFP media
with up to two SFPs.
[Order number]
Labeling on the device
MM992-2SFP
(SFP media module)
2 x 100/1000 Mbps [6GK5 992-2AS00-8AA0]
9922AS
To Next Page
Loading...
Need help?
General