Technical specifications
8.3 X-300M technical specifications
SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20
169
Table 8- 31 Reconfiguration times for redundancy mechanisms
Standby link 300 ms
Mean time between failure (MTBF)
The value in the following table applies to the basic device without media modules.
1)
1)
This value applies at 40 °C.
In the calculation of the MTBF of a modular switch, the standard parts count applies; in other
words, the reciprocals of all component failure rates are added.
The reciprocal of this total id the MTBF of the entire assembly.
Table 8- 32 Full wire speed switching
Number of frames per second
8127 81274 1518 bytes
-300 support "full wire speed switching" complying with IEEE 802.3 on all
ports. The number of packets therefore depends on the packet length.
To Next Page
Loading...
Need help?
General