Siemens SCALANCE X308-2 User Manual

Technical specifications
8.9 MM900 technical specifications
SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20
207
Type
Installation
location
Without me-
dia module
MM992-2CUC
MM992-2CUC (C)
MM992-2CU
MM992-2M12 (C)
MM992-2VD
MM991-2
MM991-2FM
MM991-2LD
MM991-2 (SC)
MM991-2LD (SC)
MM992-2
MM992-2 (C)
MM992-2LD
MM991-2LH+
(SC)
MM992-2LH
MM992-2LH+
MM992-2ELH
Media module
MM992-2SFP
with SFP trans-
ceiver
SFP991-1
SFP991-1LD
SFP992-1
SFP992-1LD
Media module
MM992-2SFP
with SFP transceiv-
er
SFP991-1LH+
SFP992-1LH
SFP992-1LH+
SFP992-1ELH
SFP991-1ELH200
1)
Only hardware product version 02 of the media modules is permitted.
The hardware product version is shown on the product. You can also read out this information from the device with the
WBM or the CLI.
2)
The permitted
operating temperature depends on how the mounting device was installed. The installation is horizontal if
the device labeling is from left to right. With a vertical installation, the device labeling is rotated through 90°.
Table 8- 120
Operating temperature with media module MM991-2P
Type
Operating temperature
X-300M
X-300M PoE
• - 25 °C to + 40 ℃
XR-300M
XR-300M PoE
XR-300M EEC
The slot above an MM991-2P may be used as follows:
• Without media module:
- 25 °C to + 50 °C)
• With media module MM992-2CUC or MM992-2CU:
- 25 °C to + 40 °C)
Note the information under "MM991-2P product character-
istics".
Table 8- 121 Permitted ambient conditions
Storage/transport temperature
-40 °C to +85 ℃
Max. relative humidity in operation at 25 °C
<= 95% (no condensation)
Max. ambient temperature at operating altitude As of 2000 m:
-5 °C of the max. operating temperature
1)
As of 3000 m:
-10 °C of the max. operating temperature
1)
1)
See table: "Operating temperature depending on the media modules used"

Siemens SCALANCE X308-2 Specifications

General

Brand	Siemens
Model	SCALANCE X308-2
Category	Switch
Language	English