Technical specifications
8.10 SFP technical specifications
SCALANCE X-300
222 Operating Instructions, 05/2016, A5E01113043-20
-300 support full wire speed switching complying with IEEE 802.3 on all
The number of packets depends on the packet length according to the IEEE802.3 standard:
Table 8- 142 Full wire speed switching
At a frame length of (in bytes):
Note
The following applies to IE
Switches X-300:
Switches X-300 connected in a line influences the frame propagation time.
When a frame passes through an IE
Switch X-300, it is delayed by the Store&Forward
Switch X-300
with a 64 byte frame length by approx. 10 microseconds (at 100 Mbps)
with a 1500 byte frame length by approx. 130 microseconds (at 100 Mbps)
This means that the more IE
Switch X-300 devices the frame passes through, the longer the
To Next Page
Loading...
Need help?
General