Siemens SIMATIC Field PG M6 - Data Backup Procedures

Maintaining and repairing the device
8.3 Configuring firmware/BIOS
SIMATIC Field PG M6
72 Operating Instructions, 12/2018, A5E43198909-AA
8.3
Configuring firmware/BIOS
You can find information on the firmware/BIOS under: "Firmware/BIOS description
(Page 91)".
8.4
Backing up data
We recommend the software tool
SIMATIC IPC Image & Partition Creator
(as of V3.5.1) to
back up data under Windows.
This tool enables easy backup and fast restoration of entire memory cards and drive
contents as well as individual partitions (images).
It supports burning DVD media.
SIMATIC IPC Image & Partition Creator
can be ordered using the Siemens online ordering
system (https://mall.industry.siemens.com). For more information about SIMATIC IPC
Image & Partition Creator, refer to the corresponding product documentation.
8.5
Modifying the partitions
We recommend the software tool
SIMATIC IPC Image & Partition Creator
(as of V3.5.1) for
modifying partitions under Windows.
SIMATIC IPC Image & Partition Creator
can be ordered using the Siemens online ordering
system (https://mall.industry.siemens.com). For more information about SIMATIC IPC
Image & Partition Creator, refer to the corresponding product documentation.
You can find information on partitioning the operating system in the factory state under "Boot
mode and partitions in the delivery state (Page 103)".
8.6
Recycling and disposal
The devices described in these operating instructions can be recycled thanks to their low
level of pollutants. Contact a certified disposal service company for environmentally sound
recycling and disposal of your old devices.