Siemens SIMATIC Field PG M6 User Manual

Technical specifications
9.2 Directives and declarations
SIMATIC Field PG M6
74 Operating Instructions, 12/2018, A5E43198909-AA
9.2
Directives and declarations
9.2.1
Notes on the CE mark
Notes on the CE mark
The following applies to the SIMATIC product described in this documentation:
RED Directive
This product is designed for the following applications:
Application
Requirement for
Emissions
Immunity
Residential, business and commercial oper-
ations, and small businesses
EN 61000-6-3 EN 61000-6-1
Industrial applications
EN 61000-6-4
EN 61000-6-2
This product meets the requirements of the Radio Equipment Directive: 2014/53/EU
The protection goals of the directive were tested according to the following standards:
● Health: EN 50566
● Safety: EN 62368-1:
● EMC: EN 301 489-1, EN 301 489-17,
● Radio: EN 300 328, EN 301 893,
RoHS Directive
This product meets the requirements of the RoHS Directive (Restriction of Hazardous
Materials): 2011/65/EU.
Compliance with the directive was tested according to the following standard: EN 50581.
Declaration of conformity
The EC declaration of conformity and the corresponding documentation are made available
to authorities in accordance with the EC directives stated above. Your sales representative
can provide these on request.
Installation guidelines
The installation guidelines and safety notices specified in the supplied documentation must
be adhered to during commissioning and operation.
Connecting peripherals
Noise immunity requirements to EN 61000-6-2 are met if connected peripherals are suitable
for industrial applications. Peripheral devices must only be connected using shielded cables.

Siemens SIMATIC Field PG M6 Specifications

General

Brand	Siemens
Model	SIMATIC Field PG M6
Category	Motherboard
Language	English