Siemens SIMATIC Field PG M6 User Manual

Technical specifications
9.6 Firmware/BIOS description
SIMATIC Field PG M6
Operating Instructions, 12/2018, A5E43198909-AA
97
9.6.5
BIOS Setup settings
Documenting your device configuration
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
Note
Print out the table below and keep the pages in a safe place once you made your entries.
BIOS Setup default settings
System parameters
Defaults
Custom entries
Main
System Time
hh:mm:sss
System Date
MM/DD/YYYY
Boot configuration
Numlock
On
POST errors
Never halt on errors
Peripheral Configuration
Internal COM 1
Enabled
On-board Ethernet 1
Enabled
Ethernet 1 Address 00:1B:1B:41:42:7B (exam-
ple)
On-board Ethernet 2
Enabled
Ethernet 2 Address 00:1B:1B:0A:85:10 (exam-
ple)
WLAN
Last State
MPI Enabled
SD card
Enabled
ExpressCard Enabled
Touchpad
Enabled

Siemens SIMATIC Field PG M6 Specifications

General

Brand	Siemens
Model	SIMATIC Field PG M6
Category	Motherboard
Language	English