Siemens SIMATIC Field PG M6 User Manual

Technical specifications
9.6 Firmware/BIOS description
SIMATIC Field PG M6
96 Operating Instructions, 12/2018, A5E43198909-AA
9.6.4
Exit menu
You always exit BIOS Setup in this menu.
Exit Saving Changes All changes are saved and the system is restarted with the new Setup
parameters.
Save Change Without
Exit
All changes are saved
Exit Discarding Changes All changes are discarded and the system is restarted with the old Setup
parameters.
Load Optimal Defaults All setup parameters are reset to the safe default values.
Notice
: The existing Setup parameters are overwritten by this.
Load Custom Defaults The profile must be loaded with the custom Setup parameters.
Requirement: The parameters are saved prior to this with "Save Custom
Defaults".
Notice
: All existing Setup parameters are overwritten during loading.
• Write down the BIOS Setup settings beforehand
• Save the BIOS Setup settings as user-specific profile.
Save Custom Defaults The currently configured Setup parameters are saved as a custom profile
(see also "Load Custom Defaults").
Discard Changes
All changes are discarded.

Siemens SIMATIC Field PG M6 Specifications

General

Brand	Siemens
Model	SIMATIC Field PG M6
Category	Motherboard
Language	English