Siemens SIMATIC FM 353 - Page 342

User Data Block (AW-DB)
B-4
FM 353 Stepper Drive Positioning Module
6ES7 353-1AH01-8BG0
Table B-1 User data block (AW−DB), continued
Adresse
absolut
CommentData typeVariable
42.3 BLEXT_EN BOOL Actual value block change
42.4 SERVDAT_EN BOOL Service data
42.5 OC_ERR_EN BOOL Operating error no.
42.6...43.2 Reserved
43.3 PARRD_EN BOOL Parameter/data
43.4 DIGIO_EN BOOL Dig. inputs/outputs
43.5 OPDAT1_EN BOOL Additional operating data
43.6 APPDAT_EN BOOL Application data
43.7 MSRRD_EN BOOL Read measured values
Ready signals (for Initiation signals, single settings)
44.0 SERVO_D BOOL Controller enable
44.1 GAUG_FLY_D BOOL On-the-fly measuring
44.2...44.4 Reserved
44.5 TRAV_MON_D BOOL Rotation monitoring
44.6 PARK_AX_D BOOL Parking axis
44.7 SIM_ON_D BOOL Simulation on
45.0...45.1 Reserved
45.2 MSR_D BOOL Length measurement
45.3 REF_TRIG_D BOOL Retrigger reference point
45.4 DI_OFF_D BOOL Enable input disabled
45.5 Reserved
45.6 SSW_DIS_D BOOL Software limit positions disabled
45.7 Reserved
Ready signals (for Initiation signals, single commands)
46 Reserved
47.0 MD_D BOOL Activate MD
47.1 DELDIST_D BOOL Delete residual distance
47.2 SEARCH_F_D BOOL Automatic block advance
47.3 SEARCH_B_D BOOL Automatic block return
47.4 Reserved
47.5 RESET_AX_D BOOL Restart
47.6 AVALREM_D BOOL Rescind setting of actual value
47.7 Reserved
Ready signals (for Initiation signals for Write requests)
48.0 VLEV_D BOOL Speed levels 1, 2