Siemens SIMATIC IFP1200 Basic

Technical information
7.4 Rating plate
IFP Basic
Operating Instructions, 06/2023, A5E46178354 - AD
65
7.4 Rating plate
The rating plate includes information that clearly identifies your device. You need this
information when you contact Customer Support.
IFP1200/1500/1900/2200 Basic
The figure below shows the rating plate of SIMATIC IFP Basic.
①
Article number
②
Serial number
③
ID link
④
Product version
ID link
The ID link is a globally unique identifier according to IEC 61406, which you can find as a QR
code on the product and product packaging. You can recognize the ID link by the frame with
a black frame corner at the bottom left. After scanning the QR code on the product or on the
packaging label with a smartphone camera, barcode scanner or reader app, the ID link takes
you to the digital nameplate of your products, where you can look through the following
information:
• Manuals: Quick Install Guide, Operating Instructions and Original Instructions
• Certificates
• Technical data
• FAQ information
• Product notes