Commissioning the device and device functions
4.2 Switching the device on/off
SIMATIC IPC277G
Operating Instructions, 08/2021, A5E50059956-AA
41
Following the initial switch-on, the operating system pre-installed on the device is set up
automatically on the device.
Faulty installation
If you change the default values in the BIOS setup or turn off the device during the
installation, the operating system cannot be installed correctly. The operating safety of the
device and the plant is at risk.
Do not switch off the device during the entire installation process. Do not change the
default values in the BIOS setup.
Procedure - Switching on the device
1. Set the On/Off switch to "ON" position.
The device carries out a self-test. During the self-test, the following message appears:
Press Esc for Boot Options
2. Wait for the message to disappear.
3. Follow the instructions on the screen.
Procedure - Switching off the device
To turn off the device, always select the function "Start" > "Shut down".
If the device is not going to be used for a long period of time after shutdown, set the On/Off
switch to the "OFF" position after device has finished shutdown operation.
Additional information
Information on your operating system can be found on the Internet:
• Microsoft® Windows® 10
(https://support.industry.siemens.com/cs/ww/en/view/109749498)
• Reinstalling the operating system (Page 66)
To Next Page
Loading...
