Maintaining and repairing the device
7.5 Reinstalling the operating system
SIMATIC IPC277G
Operating Instructions, 08/2021, A5E50059956-AA
67
Drivers and software list
The following drivers and software need to be installed on Windows 10:
Drivers and software needed
• Step1: Intel® Chipset Device Software
• Step2: Intel® Converged Security Engine
• Step3: Intel® HECI Controller Driver
• Step4: Intel® Gigabit Ethernet Driver
• Step5: Intel® UHD Graphics Driver
• Step6: Intel® Serial I/O Driver
• Step7: Intel® Graphics Command Center
• Step8: Panel Drivers and Tools software
Procedure
1. Connect the supplied USB stick to the USB port.
2. Start the program "START_DocuAndDrivers".
3. Select "Drivers" in the index.
4. Select the device and operating system.
5. Select the required driver.
6. Follow the below steps and click the icon
to install the required driver.
new installation of Windows operating systems, the chipset driver must be installed
before all other drivers, if required.
Step 1: install the chipset driver
1. Click Step1: Intel® Chipset Device Software.
2. Click
to install the chipset driver.
3. Click Next to continue.
4. Click Accept to accept the license agreement.
5. Click Install to allow the computer to start the installation.
The installation starts.
6. Click Yes to confirm the user account control question.
7. Click Finish.
The chipset installation is completed.
To Next Page
Loading...
Need help?
General
