Siemens SIMATIC IPC377G User Manual

Technical specifications
8.4 Technical data
SIMATIC IPC377G
Operating Instructions, 07/2022, A5E51366314-AB
73
Noise immunity on
signal lines
Burst:
• ± 1 kV (5 kHz /100 kHz) in accordance with IEC 61000-4-4; Length of
signal port extension cable < 30 m
• ± 2 kV (5 kHz /100 kHz) in accordance with IEC 61000-4-4; Length of
signal port extension cable ≥ 30 m
Surge:
• ± 1 kV line-to-line; ± 2 kV line-to-earth in accordance with IEC 61000-4-
5; Length of signal port extension cable ≥ 30 m
Immunity to discharges
of static electricity
• ± 6 kV contact discharge in accordance with IEC 61000-4-2
• ± 2, ± 4, ± 8 kV air discharge in accordance with IEC 61000-4-2
Radiation Immunity, in
accprdance with IEC
61000-6-2
• 80 MHz to 1 GHz
10 V/m, 80 % AM (1 kHz)
• 1.4 GHz to 6 GHz
3 V/m, 80 % AM (1 kHz)
Conducted Immunity, in
accordance with IEC
61000-4-6
10 kHz to 80 MHz: 10 V, 80% AM (1kHz)
Conducted Emission, in
accordance with IEC
61000-6-4 + A1
• 0.15 to 0.5 MHz / 79 dB (μV) Q, 66 dB (μV) M
• 0.5 to 30 MHz / 73 dB (μV) Q, 60 dB (μV) M
Conducted Emission
(Telecommunications/Ne
twork Port), in
accordance with IEC
61000-6-4 + A1
0.15 to 0.5 MHz:
• 97 dB(μV) to 87 dB(μV) Q
• 84 dB(μV) to74 dB(μV) M
0.5 MHz to 30 MHz:
• 87 dB(μV) Q / 74 dB(μV) M
Main circuit board
Processor
• Intel Atom® x6413E: Quad Core, 1.5 GHz, burst frequency
3.0 GHz, 9W TDP
Main memory
Memory expansion up to 16 GB with the following memory
modules:
• 4G DDR4 SDRAM
• 8G DDR4 SDRAM
• 16G DDR4 SDRAM
The max speed of memory is up to 3200 MT/s.
The memory module supports IBECC function, and its default
value in BIOS is "Disable".
M.2 Module
• Slot X100: support NGFF M.2
2230/2242/2260/2280/3030/3042/3052 with Key B/Key B+M
• Slot X101: support NGFF M.2
2230/2242/2260/3030/3042 with Key B/Key B+M
Max. permitted total power loss for
each M.2 B key module
Less than 2.5 W

Siemens SIMATIC IPC377G Specifications

General

Brand	Siemens
Model	SIMATIC IPC377G
Category	Industrial PC
Language	English