Glossary
SIMATIC IPC527G
Operating Instructions, 03/2019, A5E45491226-AA
119
Generic term which describes all functions for controlling and monitoring user program
execution, distribution of system resources to the user programs and the operating mode in
cooperation with the hardware (for example, Windows 7 Ultimate).
The pixel represents the smallest element that can be reproduced on-screen or on a printer.
Generally, a reference to the ability of a computer to automatically configure the system for
communication with peripheral devices (for example monitors, modems or printers). The
user can plug in a peripheral and "play" it at once without manually configuring the system. A
Plug&Play PC requires both a BIOS that supports Plug&Play and a Plug&Play expansion
card.
Self-test performed by the BIOS after the computer is switched on. Performs a RAM test and
a graphics controller test, for example. The system outputs audible signals (beep codes) if
the BIOS detects any errors; the relevant message indicating cause of error is output on the
screen.
The programmable controllers of the SIMATIC S7 system consist of a central controller, one
or more CPUs, and various other modules (e.g. I/O modules).
A
reboot E
ecution
nvironment server is part of a network environment and can provide
software to connected computers even before they boot. This can involve operating system
installations or servicing tools, for example.
estricted
ccess
ocation: Installation of the device in a production facility with restricted
access, for example, a locked control cabinet.
Hardware reset: Reset/restart of the PC using a button/switch.
Warm restart of a computer without switching the power off (Ctrl + Alt + Del)
To Next Page
Loading...
Need help?
General
