Maintaining and repairing the device
6.3 Installing and removing hardware
SIMATIC IPC527G
46 Operating Instructions, 03/2019, A5E45491226-AA
All technical specifications and approvals of the device only apply if you use expansion
components that have a valid CE approval (CE mark). The installation instructions for
expansion components in the associated documentation must be observed.
UL approval of the device only applies when the UL-approved components are used
according to their "Conditions of Acceptability".
We are not liable for functional limitations caused by the use of third-party devices or
components.
Tools to open the device, see section "Open the device (Page 36)". You can make repairs
on the device with the following tools:
● T20 screwdriver for function earth connection
● PH2 screwdriver for all of the remaining screws
Installing and removing hardware
6.3.1
Replacing the device fan
Requirement
● The device is opened.
● A PH2 screwdriver
To Next Page
Loading...
