Expanding and assigning parameters to the device
5.4 Memory module
SIMATIC IPC527G
42 Operating Instructions, 03/2019, A5E45491226-AA
To install the memory module
• Only install memory modules designed for the default motherboard.
• Recommend to select
memory modules with the same brand, capacity, speed, and chips if you use
multiple Memory Modules.
• Unplug the power cord from the power outlet before installing Memory Module.
• A memory module can be installed only when the direction is correct. Switch the
direction if the memory cannot able to be inserted into the memory socket.
• DDR2 and DDR3 memory modules are not compatible. Please
make sure to install DDR4 Memory Module on this motherboard.
Follow the steps below to install memory module on motherboard memory sockets:
the retaining clips outward to unlock
memory socket.
a memory module on the socket so
notch on memory matches the
nment key on memory socket.
nsert and press the memory module into
the socket until the retaining clips snap ba
to the original place, and the
module is seated properly.
To Next Page
Loading...
Need help?
General
