Siemens Simatic IPC527G - Page 91

Technical specifications
7.6 BIOS description
SIMATIC IPC527G
Operating Instructions, 03/2019, A5E45491226-AA
91
Discard Changes and Reset
You can reboot the system without saving the changes with the following steps:
1. Select
Discard Changes and Reset
with the arrow keys and press
Enter
key.
2. Select
Yes
and press
Enter
key to discard changes and reset. Or Select
No
to quit.
Restore Defaults
Restore/load default values for all setup options. You can restore the system with the
following steps:
1. Select
Restore Defaults
with the arrow keys and press
Enter
key.
2. Select
Yes
and press
Enter
key to the load optimized defaults. Or Select
No
to quit.
Save as User Defaults
This option saves current configuration as User Defaults. You can save your settings as user
default settings with the following steps:
1. Select
Save as User Defaults
with the arrow keys and press
Enter
key.
2. Select
Yes
and press
Enter
key to save the settings as user defaults. Or Select
No
to
quit.
Restore User Defaults
This option restores User Defaults to all setup options. You can restore the user default
settings with the following steps:
1. Select
Restore User Defaults
with the arrow keys and press
Enter
key.
2. Select
Yes
and press
Enter
key to load optimized defaults. Or Select
No
to quit.
EZ Flash 3 Utility
This option is used for updating BIOS. Press
Enter
to launch the EZ Flash 3 screen.