Siemens SIMATIC NET CP 443-1 Advanced User Manual

Approvals
CP 443-1 Advanced (GX30)
114 Manual, 03/2019, C79000-G8976-C256-05
Applied standards:
● EN 61000-6-4
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard
for industrial environments
● EN 61000-6-2
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for
industrial environments
RoHS
The CP meets the requirements of the EU directive 2011/65/EC on the restriction of the use
of certain hazardous substances in electrical and electronic equipment.
Applied standard:
● EN 50581:2012
c(UL)us
Applied standards:
● Underwriters Laboratories, Inc.: UL 508 Listed (Industrial Control Equipment)
● Canadian Standards Association: CSA C22.2 No. 142 (Process Control Equipment)
Report / UL file: E85972 (NRAG, NRAG7)
cULus Hazardous (Classified) Locations
Underwriters Laboratories, Inc.: cULus IND. CONT. EQ. FOR HAZ. LOC.
Applied standards:
● ANSI ISA 12.12.01
● CSA C22.2 No. 213-M1987
APPROVED for Use in:
● Cl. 1, Div. 2, GP. A, B, C, D T4
● Cl. 1, Zone 2, GP. IIC T4
Ta: Refer to the temperature class on the type plate of the CP
Report / UL file: E223122 (NRAG, NRAG7)
Note the conditions for the safe deployment of the CP according to the section Notices on
use in hazardous areas according to UL HazLoc (Page 55).
FM
Factory Mutual Approval Standard Class Number 3600, 3611, 3810
Class I, Division 2, Group A, B, C, D, T4 or Class I, Zone 2, Group IIC, T4

Siemens SIMATIC NET CP 443-1 Advanced Specifications

General

Brand	Siemens
Model	SIMATIC NET CP 443-1 Advanced
Category	Computer Hardware
Language	English