SIMATIC HMI Documentation
Release 04/02
C-4
Panel PC 670 Computing Unit, Equipment Manual
ContentTarget GroupDocumentation
Communication
User’s Guide
Programmers Contains information on connecting line- and
graphic-based control panels to the following controls:
S SIMATIC S5
S SIMATIC S7
S SIMATIC 500/505
S drivers for other PLCs
This documentation describes the
S configuration and parameters required for
connecting the devices to the PLC and the network
S user data areas used for exchanging data between
operating unit and PLC.
Communication for
Windows-based systems
User’s Guide
Programmers Contains information on connecting Windows-based
systems to the following controls:
S SIMATIC S5
S SIMATIC S7
S SIMATIC WinAC
S SIMATIC 505
S Integration in SIMATIC iMap
S SIMOTION
S drivers for other PLCs
This documentation describes the
S configuration and parameters required for
connecting the devices to the PLC and the network
S user data areas used for exchanging data between
operating unit and PLC.
Other PLCs
Online Help
Programmers Contains information on connecting control units to the
OPC and to the controls of:
S Allen Bradley
S GE Fanuc
S Lucky Goldstar GM
S Mitsubishi
S Modicon
S Omron
S Telemecanique
When the drives are installed, the relevant Online Help
is installed at the same time.
ProAgent for OP
User’s Guide
ProAgent/PC and
ProAgent/MP
User’s Guide
Configurers Contains the following information on the option
package ProAgent (process diagnosis):
S configure installation-specific process diagnosis
S detect process errors, find the cause of an error
and correct error
S adjust the supplied diagnosis figures to user
requirements
To Next Page
Loading...
