3. Select the "Graphic View" tab.
Note:
You can move the displayed objects. You can select the section displayed via the thumbnail
view. Position the objects in accordance with the cable sequence in the system.
4. Using drag-and-drop, connect the I/Os of the CPU and the interface modules (green
squares) in accordance with the cable sequence in the system.
You can make additional system-specific settings on the "Table View" tab. For additional
information, refer to the online help of the dialog box.
Additional information
● Online help for
STEP 7
Advantages of high availability components
5.3 Communications connections
High Availability Process Control Systems (V9.0)
124 Function Manual, 05/2017, A5E39221836-AA
To Next Page
Loading...
