Point-to-point connection CP 440 Installation and Parameter Assignment
Manual, 09/2007, A5E00057742-03
13
Product Description
1
1.1 Uses of the CP 440
Applications
The CP 440 communication processor enables you to exchange data between automation
devices or computers by means of a point-to-point connection. The CP 440 is designed to
transfer short, fast frames.
The following are typically connected to it:
● Scanners, barcode readers
● Sensors
● Weighing scales
Functionality of the CP 440
The CP 440 communication processor provides the following functionality:
● An integrated MPI (Multipoint) X27 (RS422/485) interface
● A maximum transmission length of 400 bytes (Page 86)
● A transmission rate of up to 115.2 kbps, full-duplex
● Integration of the most important transmission protocols in the module firmware
– ASCII driver
– 3964(R) Procedure
● Customization of the transmission protocols by means of parameter assignment with the
CP 440: Point-to-Point Communication, Parameter Assignment interface
Uses of the CP 440
The CP 440 communication processor allows point-to-point communication with
SIMATIC modules and with non-Siemens products.
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
To Next Page
Loading...
