Configuring and Parameter Assignment the CP 440
5.2 Installing the Programming Interface
Point-to-point connection CP 440 Installation and Parameter Assignment
66 Manual, 09/2007, A5E00057742-03
Further Information
How to configure S7-400 modules is described in detail in the
Configuring Hardware and
Communication Connections STEP 7 V5.0
manual.
In addition, STEP 7's online help system will provide you with all the assistance you will need
when configuring an S7-400 module.
5.2 Installing the Programming Interface
Installation
The CP 440: Point -to-Point Communication, Parameter Assignment interface is supplied
together with the function blocks and the programming examples on a CD.
To install the engineering tool:
1. Insert the CD into the CD drive of your programming device/PC.
2. Under Windows 95/NT or Windows 98, start the dialog for installing software by double-
clicking the "Add/Remove Programs" icon in "Control Panel".
3. In the dialog box, select the CD drive and the "Setup.exe" file and start installation.
4. Follow the step-by-step instructions of the Setup program.
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
To Next Page
Loading...
Need help?
General
