Communication via Function Blocks
6.1 Overview of the Function Blocks
Point-to-point connection CP 440 Installation and Parameter Assignment
Manual, 09/2007, A5E00057742-03
87
Scope of Supply and Installation
The function blocks of the CP 440 are on CD along with the parameter assignment interface,
the programming examples and the manual.
The function blocks are installed together with the parameter assignment interface. After
installation, the function blocks are stored in the CP 440 library.
You can open the library in STEP 7 SIMATIC Manager by selecting File > Open > Library
under "CP PTP\CP 440\Blocks".
To work with the function blocks, you only need to copy the required function block to your
project.
See also
Parameters for the Communications Protocols (Page 67)
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
To Next Page
Loading...
