Siemens SIMATIC S7 F User Manual

Index
Fail-Safe Systems
Index-4 A5E00085588-03
Rules for F blocks ........................................ 5-10
Rules for F conversion blocks...................... 5-36
Rules for F driver blocks ..............................5-16
Rules for interconnecting F blocks............... 5-12
Rules for operation.........................................6-1
Rules for testing........................................... 5-56
Rules for the program structure ..................... 5-7
Rules for the run-time groups ........................5-9
Run sequence within a run-time group ........ 5-14
Run Times of the Fail-Safe Blocks............. 8-141
Run-time groups
scan rate.................................................. 5-12
Run-time properties of the Safety Program.. 5-14
S
S7 F Systems optional package ..................1-10
S7-400FH
both CPUs master at the same time .......... 6-1
fiber-optic cables between
synchronization modules .......................6-1
Safe state....................................................... 3-3
Safety certification..........................................7-1
Safety data format.......................................... 8-2
Safety function............................................... 1-1
Safety Integrity Level ..............................1-1, 7-5
Safety level .............................................1-1, 7-4
Safety mechanisms........................................ 3-1
Safety mode................................................... 3-2
Safety mode of the F-I/Os..............................3-2
Safety mode of the Safety Program............... 3-2
Safety program ............................................1-10
Safety Program............................................ 1-10
testing ......................................................5-56
Safety Program
compiling.................................................. 5-43
Safety Program on the memory card........... 5-47
Safety Program s
managing................................................. 5-39
Safety requirements.......................................7-4
Safety-Related Communication ..................... 3-9
Safety-related communication between
CPUs .......................................................3-12
Safety-related parameters ........................... 7-17
Save reference data..................................... 5-66
Self-tests........................................................3-5
Sending
F_BOOL data........................................... 8-27
F_REAL data ........................................... 8-31
Setting up Access Rights for the CPU ........... 4-8
Setting up the hardware.................................2-4
SFC F_CTRL............................................... 8-84
Simulating an Safety Program with
S7-PLCSIM...............................................5-57
Simulating PROFIsafe nodes.........................6-1
Simulating Safety Programs.........................5-57
Simulation................5-57, 5-58, 5-59, 5-60, 5-61
Simulation blocks ...........................................5-3
Simulation mode...........................................5-16
Software architecture .....................................5-1
Software components...................................1-10
Standard run-time groups...............................5-9
Standards
certificates and approvals...........................7-1
Starting Up a Fault-Tolerant F System.........2-16
Starting Up the F System .............................2-11
Startup (cold restart or warm restart)............5-29
Startup characteristics..................................8-22
Startup protection................................. 3-4, 5-28
Step-by-step acceptance of the
configuration.............................................7-14
Structure element
selecting...................................................5-12
Structure of the Safety Program.....................5-1
Substitute values................................ 5-21, 5-22
Switching safety mode on.............................5-42
Switching safety mode on and off.................5-40
Symbolic names.............................................4-4
System Configuration.....................................7-7
T
Testing offline...............................................5-57
Testing the Safety Program..........................5-56
Time-based program execution monitoring ....3-6
U
Uninstallation of the S7-400F/FH ...................6-5
User acknowledgment............... 5-25, 5-26, 5-27
User times
inaccuracy..................................................3-7
V
Version management system.......................7-14
W
Warm restart...................................................3-4
Working with F-Systems...............................1-19

Siemens SIMATIC S7 F Specifications

General

Brand	Siemens
Model	SIMATIC S7 F
Category	Controller
Language	English