General information and safety notes
1.6 Particular types of hazards
BA 2030 (2KJ4)
Operating Instructions, 07/2020, A5E50009094A/RS-AL
11
1.6 Particular types of hazards
Extreme surface temperatures
Hot surfaces over +55 °C pose a burn risk.
Cold surfaces below 0 °C pose a risk of damage due to freezing.
Do not touch the gearbox without protection.
Hot, escaping oil
Before starting any work wait until the oil has cooled down to below +30 °C.
Poisonous vapors when working with solvents
Avoid breathing in vapors when working with solvents.
Ensure adequate ventilation.
Risk of explosion when working with solvents
Ensure adequate ventilation.
Rotating parts can throw off small foreign particles such as sand or dust.
In addition to the prescribed personal protection gear, also wear suitable protective gloves
and safety glasses.
To Next Page
Loading...
