Siemens SIMOGEAR BA 2030 - Surface Treatment; General Information on Surface Treatment

Technical description
2.5 Surface treatment
BA 2030 (2KJ4)
16 Operating Instructions, 07/2020, A5E50009094A/RS-AL
2.5 Surface treatment
2.5.1 General information on surface treatment
All paint finishes are sprayed on.
WARNING
Danger due to electrostatic discharge
For paint finishes in explosion group III, the paint can be electrostatically charged as a result
of intensive dust accumulation or processes with high levels of electrostatic charging.
Risk of explosion as a result of processes with high levels of electrostatic charging.
Minimize the risk of electrostatic charging by applying effective measures according to
IEC 60079-32-1.
NOTICE
Failure of the external protection
If the paint finish is damaged, the geared motor may corrode.
Do not damage the paint finish.
Note
Information about the ability to be repainted does not guarantee the quality of the paint
product supplied by your supplier.
Only the paint manufacturer is liable for the quality and compatibility.
Note
C1 paints are not suitable for ambient air temperature below -20 °C.