Siemens SIMOGEAR BA 2030 - Shaft Seals and Cooling; Surface Treatment

Technical description
2.5 Surface treatment
BA 2030 (2KJ4)
Operating Instructions, 07/2020, A5E50009094A/RS-AL
19
2.5.3 Primed version
Table 2- 3 Primer according to corrosiveness category
Paint system
Can be overpainted with
Unpainted corrosiveness category C1
Cast iron parts immersion primed,
steel parts primed or zinc-plated,
aluminum and plastic parts untreated
• Synthetic paint, synthetic resin paint, oil paint
• 2-component polyurethane paint
•
2-component epoxy paint
Primed according to corrosiveness category C2 G
2-component epoxy zinc phosphate,
desired coat thickness 60 μm
• 2-component - polyurethane paint
• 2-component - epoxy paint
• 2-component - acrylic paint
•
Acid-hardening paint
Primed according to corrosiveness category C4 G
2-component epoxy zinc phosphate,
desired coat thickness 90 μm
• 2-component - polyurethane paint
• 2-component - epoxy paint
• 2-component - acrylic paint
•
Acid-hardening paint