Siemens SIMOGEAR BA 2030 - Incoming Goods, Transport, and Storage; Incoming Goods and Transport

Incoming goods, transport, and storage
3.3 Storage
BA 2030 (2KJ4)
Operating Instructions, 07/2020, A5E50009094A/RS-AL
23
Table 3- 1 Maximum load of the eyebolt on the gearbox
Thread size
m
d3
Thread size
m
d3
[kg]
[mm]
[kg]
[mm]
M8
140
36
M20
1200
72
M10
230
45
M24
1800
90
M12
340
54
M30
3200
108
M16
700
63
-
-
-
The eyebolt corresponds to DIN 580.
3.3 Storage
3.3.1 General information for storage
WARNING
Danger of serious injuries caused by falling objects
Danger of damage to the gearbox when stacked
Do not stack gearboxes or geared motors on each other.
NOTICE
Failure of the external protection
Mechanical damage, chemical damage and thermal damage, such as scratches, acids,
alkalis, sparks, welding beads and heat cause corrosion.
Do not damage the paint finish.
Unless contractually agreed otherwise, the guarantee period for the standard preservative
lasts 6 months from the date of delivery.
In the case of storage in transit over 6 months, special arrangements must be made for
preservation. Please contact Technical Support.
Store the gearbox or geared motor in dry, dust-free rooms that are maintained at a constant
temperature.
The storage location must be vibration- and shock-free.
The free shaft extensions, sealing elements and flange surfaces must have a protective
coating.