Installation
4.6 Gearboxes in foot or flange version
BA 2030 (2KJ4)
30 Operating Instructions, 07/2020, A5E50009094A/RS-AL
4.6 Gearboxes in foot or flange version
Impermissible housing loadings caused by incorrectly installed add-on elements
Do not subject the gearbox housing to excessive stress by adding add-on elements to the
foot or flange.
Add-on elements must not transmit forces, torques, and vibrations to the gearbox.
To prevent strains on the housing, fasten the gearbox only on the flange or the foot fastening
for force and torque transmission. Refer to Gearbox with foot mounting (Page 27).
The second mounting option (foot or flange) is intended for add-on elements, for
example, protection covers with an intrinsic weight of up to max. 30% of the weight of the
gearbox.
4.7 Mounting an input or output element on the gearbox shaft
Risk of burns caused by hot parts
Do not touch the gearbox without protection.
Damage to shaft sealing rings caused by solvent
Avoid any contact of solvent or benzine with the shaft sealing rings.
Damage to shaft sealing rings caused by heating
Use thermal shields that can block radiant heat to protect shaft sealing rings from heating
Premature wear or material damage due to misalignment
Misalignment caused by excessive angular or axis displacement to the connecting shaft
extensions.
Ensure precise alignment of the individual components.
To Next Page
Loading...
