Siemens SIMOGEAR BA 2030 - Rating Plate Data; General Technical Data

Technical data
10.2 Rating plate data
BA 2030 (2KJ4)
82 Operating Instructions, 07/2020, A5E50009094A/RS-AL
Connection
(-)
Feather key
S
Shrink disk
T
Hollow shaft with splines
Special features
W
Reduced-backlash version
Intermediate helical gearbox - transmission stage
Z
Two-stage
D
Three-stage
Input unit
KS
Coupling adapter only for fitting a SIEMENS servomotor of the SIMOTICS S-1FK7/1FT7,
SIMOTICS M-1PH8, SIMOTICS S-1FK2, and SIMOTICS S-1FL6 series
K2
Coupling adapter with flexible coupling for fitting an IEC motor
K4
Short adapter with plug-in connection for fitting an IEC motor
K8
Coupling adapter for fitting a servomotor of the SIMOTICS M-1PH8 series
A
Adapter with free input shaft
10.2 Rating plate data
10.2.1 General technical data
The most important technical data appears on the rating plate of the geared motors.
This data, together with the contractual agreements for the geared motors, determines the
limits of intended use.
In the case of geared motors, a rating plate attached to the motor usually indicates the data
for the entire drive.