BA 2030 (2KJ4)
Operating Instructions, 07/2020, A5E50009094A/RS-AL
129
11.1 Stocking of spare parts
By stocking the most important spare parts and wearing parts on site, you can ensure that the
gearboxes or geared motors are ready for use at any time.
Safety impairment caused by inferior products
The installation or use of inferior products can have a negative impact on the design
characteristics of the geared motor and might consequently impair the active or passive
safety features of the machine.
Siemens AG states explicitly that only spare parts and optional components supplied by
Siemens have been tested and approved by Siemens.
If you do not use original spare parts and optional components, Siemens AG excludes every
liability and warranty.
Siemens AG accepts the warranty only for original spare parts.
Note that special manufacturing and delivery specifications often apply to individual
components. All spare parts offered by Siemens AG are state-of-the-art and conform to the
latest legal regulations.
Please state the following data when ordering spare parts:
• Purchase order number shown on the rating plate 2
• Type designation shown on the rating plate 3
• Part number
– 4-digit item number from the spare parts list
• Quantity
Figure 11-1 Example of a SIMOGEAR rating plate
For motors with their own rating plate, the spare parts documentation in the original
operating instructions applies.
To Next Page
Loading...
